Posts Tagged ‘pin’


HS-311 Hitec Standard Servo and Horn.jpg

This HS-311 Hitec Standard Servo and Horn model was drawn in native Solidworks 2009 format. Click below to download the 3D Solidworks HS-311 Hitec Standard Servo and Horn model. This 3d model has been provided in multiple file formats.

On this model, the hole spacing is standard for all standard-size servos. The HS-311 Hitec Standard Servo and Horn is a Solidworks 2009 assembly model and the servo horn is easily able rotate in Solidworks. The servo is controlled through a 3-pin connector, 2 pins are for power and the last pin is for a frequency pulse which controls the angle of rotation. Standard Servo, HS-311: Universal These servos are also easily modified to do full 360 degree rotations instead of +/- 45 degrees. This is a standard-size hobby servo found in hobby toys such as RC-Cars, RC-Planes, RC-Boats, RC-Helicopters, and even small hobby robots.

Solidworks: HS-311 Hitec Standard Servo and Horn.sldasm

STEP: HS-311 Hitec Standard Servo and Horn.step

IGES: HS-311 Hitec Standard Servo and Horn.igs


This Clevis- 1/4″-28, 1/4″ Hole model was drawn in native Solidworks 2009 format. Click below to download the 3D Solidworks Clevis- 1/4″-28, 1/4″ Hole model. This 3d model has been provided in multiple file formats.

This Clevis- 1/4″-28, 1/4″ Hole model is a female yoke style clevis and is made from 300 series stainless steel. The clevis attaches with a 1/4″-28 thread and used a 1/4″ pin or bolt, and the distance between the yoke is 0.281″.  The part number from Midwest Control Products Corp is 2801SS. https://www.midwestcontrol.com/buy.php?item=783

Solidworks: clevis-1/4-28-1/4-hole.sldprt

SAT: clevis-1/4-28-1/4-hole.sat

IGES: clevis-1/4-28-1/4-hole.igs

This Map Pin 1/2″ model was drawn in native Solidworks 2009 format. Click below to download the 3D Solidworks Map Pin 1/2″ model. This 3d model has been provided in multiple file formats.

This 3D model of a map pin was modeled after this 1/8 Inch Map Tacks – Dark Green package of map pins. This model can be modified using Solidworks if your map pins are a different length.

Solidworks: map-pin-.5in.sldprtSAT: map-pin-.5in.sat

IGES: map-pin-.5in.igs

This Map Pin 1.5″ model was drawn in native Solidworks 2009 format. Click below to download the 3D Solidworks Map Pin 1.5″ model. This 3d model has been provided in multiple file formats.

Solidworks: map-pin-1.5in.sldprt

SAT: map-pin-1.5in.sat

IGES: map-pin-1.5in.igs

This Push Pin model was drawn in native Solidworks format. Click below to download the 3D Solidworks Push Pin model. This 3d model has been provided in multiple file formats.

Solidworks: push-pin.sldprt

Iges: push-pin.igs

Sat: push-pin.sat

Step: push-pin.step

Stereo Lithography: push-pin.stl

Pro Engineer: push_pin.prt.1

This Standard 40pin Micro Processor Chip model was drawn in native Solidworks format. Click below to download the 3D Solidworks Standard 40pin Micro Processor Chip model. This 3d model has been provided in multiple file formats.

This Standard 40pin Micro Processor Chip model is a standard size for 40 pin chips. This chip size fits perfect into breadboards.

Solidworks: standard-40pin-micro-processor-chip.sldprt

Iges: standard-40pin-micro-processor-chip.igs

Sat: standard-40pin-micro-processor-chip.sat

Step: standard-40pin-micro-processor-chip.step

Stereo Lithography: standard-40pin-micro-processor-chip.stl

Pro Engineer: standard_40pin_micro_processor_prt.1

Links