Posts Tagged ‘craft’


Wood Mixing Stick- 6in.jpg

This Wood Mixing Stick- 6in model was drawn in native Solidworks 2009 format. Click below to download the 3D Solidworks Wood Mixing Stick- 6in model. This 3d model has been provided in multiple file formats.

This wood mixing stick is 6″ long, 11/16″ wide, and 1/16″ thick. This is a standard wood mixing stick. Keep in mind that these dimensions are nominal and the actual wooden stick will probably not have exactly the same curve at the ends because they appear to be hand ground and are all slightly different. The length and width and thickness appear to be consistent.

Solidworks: Wood Mixing Stick- 6in.sldprt

STEP: Wood Mixing Stick- 6in.step

IGES: Wood Mixing Stick- 6in.igs

This Craft Stick model was drawn in native Solidworks format. Click below to download the 3D Solidworks Craft Stick model. This 3d model has been provided in multiple file formats.

As far as I know there is only one standard size for a craft stick. Here is a 3d model of a craft stick, but most craft sticks tend to be far from perfect.

Solidworks: craft-stick.sldprt

Iges: craft-stick.igs

Sat: craft-stick.sat

Step: craft-stick.step

Stereo Lithography: craft-stick.stl

Pro Engineer: craft_stick.prt.1

Links