SolidShack

Posts Tagged ‘work’

Wood Pencil- Unsharpened

Mike on July 22, 2008 in 3D Models, Work, Office, Home 2 Comments »

This Wood Pencil- Unsharpened model was drawn in native Solidworks format. Click below to download the 3D Solidworks Wood Pencil- Unsharpened model. This 3d model has been provided in multiple file formats.

This 3d wood pencil model was modeled from a Dixon Ticonderoga #2 Pencil. This unsharpened pencil model can be sharpened by doing a cut revolve at the end of the pencil. However, keep in mind that pencil sharpeners are always different and are never perfect. There is also a Sharpened version of this same 3d wood pencil model.

Solidworks: wood-pencil-unsharpened.sldprt

Iges: wood-pencil-unsharpened.igs

Sat: wood-pencil-unsharpened.sat

Step: wood-pencil-unsharpened.step

Stereo Lithography: wood-pencil-unsharpened.stl

Pro Engineer: wood_pencil-_unsharpened.prt.1

Paper Clip- Large GEM Style

Mike on July 19, 2008 in 3D Models, Work, Office, Home No Comments »

This Paper Clip- Large GEM Style model was drawn in native Solidworks format. Click below to download the 3D Solidworks Paper Clip- Large GEM Style model. This 3d model has been provided in multiple file formats.

The GEM style paper clip is the most common type of paper clip used today.

Solidworks: paper-clip-large-gem-style.sldprt

Iges: paper-clip-large-gem-style.igs

Sat: paper-clip-large-gem-style.sat

Step: paper-clip-large-gem-style.step

Stereo Lithography: paper-clip-large-gem-style.stl

Pro Engineer: paper_clip-large_gem_style.prt.1

Paper Clip- Small GEM Style

Mike on July 19, 2008 in 3D Models, Work, Office, Home No Comments »

This Paper Clip- Small GEM Style model was drawn in native Solidworks format. Click below to download the 3D Solidworks Paper Clip- Small GEM Style model. This 3d model has been provided in multiple file formats.

The GEM style paper clip is the most common type of paper clip used today.

Solidworks: paper-clip-small-gem-style.sldprt

Iges: paper-clip-small-gem-style.igs

Sat: paper-clip-small-gem-style.sat

Step: paper-clip-small-gem-style.step

Stereo Lithography: paper-clip-small-gem-style.stl

Pro Engineer: paper_clip-small_gem_style.prt.1

Links

New 3D Models

Airsoft BB- 6mm
November 15, 2009 | 2:14 pm

This Airsoft BB- 6mm model was drawn in native Solidworks 2009 format. Click below to download the 3D Solidworks Airsoft BB- 6mm model. This 3d model has been provided in multiple file formats.

This 6mm airsoft bb actually measures at about .235in and the bb’s are not perfectly round. Even the expensive bb’s are not perfectly round. This is interesting, but they seem to work fine regardless because the bb’s spin while they are flying through the air.

Solidworks: Airsoft BB- 6mm.sldprt

STEP: Airsoft BB- 6mm.step

IGES: Airsoft BB- 6mm.igs

Storage Bowl 6.25 cups, Rubbermaid
November 14, 2009 | 11:53 pm

This Storage Bowl 6.25 cups, Rubbermaid model was drawn in native Solidworks 2009 format. Click below to download the 3D Solidworks Storage Bowl 6.25 cups, Rubbermaid model. This 3d model has been provided in multiple file formats.

Solidworks: Storage Bowl 6.25 cups, Rubbermaid.sldprt

STEP: Storage Bowl 6.25 cups, Rubbermaid.step

IGES: Storage Bowl 6.25 cups, Rubbermaid.igs

Stereo Lithography: Storage Bowl 6.25 cups, Rubbermaid.stl

Speaker 250w 6.5″, Soundstorm F265
November 14, 2009 | 3:55 pm

This Speaker 250w 6.5″, Soundstorm F265 model was drawn in native Solidworks 2009 format. Click below to download the 3D Solidworks Speaker 250w 6.5″, Soundstorm F265 model. This 3d model has been provided in multiple file formats.

I used this speaker for a speaker box. It sounded much better then the generic old speakers I had. This model helped me design the right size speaker box. Here is the speaker, Soundstorm F265 6.5-Inch 2-Way Force Loudspeakers Let me know if this speaker works out or if I should model and post more types of speakers.

Solidworks: Speaker 250w, 6.5in, Soundstorm F265.sldprt

STEP: Speaker 250w, 6.5in, Soundstorm F265.step

IGES: Speaker 250w, 6.5in, Soundstorm F265.igs

Stereo Lithography: Speaker 250w, 6.5in, Soundstorm F265.stl

Pneumatic Tire- 10″
November 14, 2009 | 9:39 am

This Pneumatic Tire- 10in model was drawn in native Solidworks 2009 format. Click below to download the 3D Solidworks Pneumatic Tire- 10in model. This 3d model has been provided in multiple file formats.

Here are the actual tires, Pneumatic Tires 10″

Solidworks: Pneumatic Tire- 10in.sldprt

STEP: Pneumatic Tire- 10in.step

IGES: Pneumatic Tire- 10in.igs

Stereo Lithography: Pneumatic Tire- 10in.stl

Crunch Amplifier 400W PZN2100
November 13, 2009 | 11:02 pm

This Crunch Amplifier 400W PZN2100 model was drawn in native Solidworks 2009 format. Click below to download the 3D Solidworks Crunch Amplifier 400W PZN2100model. This 3d model has been provided in multiple file formats.

This is an obsolete model of a Crunch amplifier but it could still be useful if you have a similar model you are trying to work with. The aesthetics of the model may not be perfect but the locations of all in inputs and outputs are accurate.

Solidworks: Crunch Amplifier 400W PZN2100.sldprt

STEP: Crunch Amplifier 400W PZN2100.step

IGES: Crunch Amplifier 400W PZN2100.igs